#Download qnap qfinder windows 7 driver
#Download qnap qfinder windows 7 manual
#Download qnap qfinder windows 7 pro

The problem lies with the QNAP.Д¬PU Intel(R) Core(TM) i5-8400T CPU 1. After a reboot, performance is backup to 900 mb / 1003 mb (read/write).Дuring performance degradation on the TB3 connection, the 1gb link stays at a consistent 100+ mb / sec. During the day, however, performance drops to as low as 65 mb / sec on the TB3 connection. When I start out with a newly started QNAP NAS, the read performance lies around 900mb / Sec (read) and 1003 mb / sec (write) with TB3 (Crystal diskmark). Hope this makes any sense, I am a total noob to all of this, but at least this seems like it has worked for me. But when I changed the IP address of the Thunderbolt network adapter to an ip to fit the virtual switch then the speed jumped up to the desired speeds. Here of course it was limited to the speed of the motherboards ethernet.

#Download qnap qfinder windows 7 manual

Be aware that on one of the computers I didnt put in a manual ip address, but was able to connect to the IP address of the 10gbe on the qnap anyways because it was on the same ethernet network of my physical switch. I have no idea why it suddenly works so much better via the virtual switch. It is the same result on both the computers now that they are connected via the virtual switch. The write speed is the limit of my NVME's. Now I have speeds of 1200+ MB/s write and 2000+ MB/s read. Also my dune can access all the files on the Qnap so I think the problem is in the Windows Pc. The Microsoft network is activated in the Qnap. For more information regarding Qfinder and other QNAP products, please visit. My Macbook has no problems (Wifi) and I can see the drive with folders. Qfinder 5.0 for Windows can be downloaded from the QNAP website (Support> Download Center> Utilities). When I type the IP address in Windows explorer it doesn't work. In my case I chose 172.22.30.10 the subnet was 255.255.255.0 and the default gateway was 172.22.30.1. With the program Qfinder the Qnap is found and I can login the Qnap. I chose an ip within the range of my 10gbe switch. I had to manually choose an IP adresse for the Thunderbolt connection on my PC (all of this in Qfinder pro). Here it created a virtual switch where the IP of the thunderbolt connection on the NAS got identical with the ip of the 10gbe port on the NAS.

#Download qnap qfinder windows 7 pro

I used QFinder Pro and enabled the T2E function and chose to map it to the QNAPs 10GBE adapter. So I knew that the write on the Thunderbolt was still 900MB/s slower than my 10gbe connection. Via 10gbe I was able to get around 1200MB/s read and 1200 MB/s write.

#Download qnap qfinder windows 7 driver

After I did some driver updates and used QFinder Pro to map the network drives it rose to 2000MB/s read but only 300 MB/s write. First I could only get about 65MB/s read and write via Thunderbolt.

Then I tried connecting two pc's with TB4 on the motherboard, both of them showed the same speeds. I had 3 computers connected to the switch via 10gbe, they were all perfect.

I had been struggeling with my QNAP via Thunderbolt which was doing very fine with 10gbe network cards.